6
5. QUICK START GUIDE
When placing the device, set it on top of something solid to give it a steady
base and prevent it from tipping over.
Make sure no humans, animals, pets are present in the area before starting
the treatment
Seal the treatment area to avoid ozone leakage to nearby areas occupied by
plants, animals or humans.
Turn off air purifier when cleaning.
6. OPERATING
To operate the Commercial Air Purifier:
Close off the desired area to be treated.
Remove all occupants and pets.
Position the unit as close as possible to the odor source.
In such environments as motels that have individual heating and cooling
systems, turn the fan on and set on re-circulate.
Set timer to desired time and leave the room.
Allow 40 minutes before re-entering the treated space.
Return to space & ventilation area.
7. MAINTENANCE
This unit’s ozone plate can be last over 10,000 hours.
When the machine no
longer produces enough ozone to be effective, the ozone plates should be
cleaned. Some environment can cause ozone output to be reduced in shorter
time but other environments may take longer.
For best results carefully clean ozone plates every 30 days.
How to replace a plate
:
First turn the unit off and unplug from outlet. Next remove the plates from back
of unit, pull plate firmly to remove from slot. With plate firmly supported in the
hand or on a flat surface, wash the stainless steel screen and ceramic plate
using a spray cleaner or detergent. Scrub with a stiff brush. A spray liquid
cleaner with ammonia or chlorine may also be used to remove any non-visible
adherents. Be careful not to drop the plate.