27
7. OPERATION
7-4-3 Display test (DISPLAY TEST)
This screen is used to check or adjust the display.
Select “DISPLAY TEST” on the test mode menu screen (see page 25), and press
the P1 Button switch 1. The Display Test screen appears. There are two types of
Display Test screen as described below.
1. Color Bar
This screen is used to check the contrast and color balance of displayed im-
ages.
2. Convergence
This screen is used to check the image display size, display position, aspect
ratio and distortion.
Each time the P1 Button switch 1 is pressed, the screen indication changes alter-
nately between the above-mentioned two screens. Select the screen according to
the item to be checked or adjusted.
* Regarding the adjustment method, refer to the CABINET Operation Manual.
After the confirmation or adjustments, press the P1 Start switch to return to the test
mode menu screen (see page 25).
To exit from the test mode, follow the procedure described in “7-4-2 Exiting from the
test mode” on page 26.
P1 8-direction lever
P1 Button switch 1
P1 Start switch
P1 side
P2 side
