NameLessRC N47 FPV Racing Drone
Binding
DSM receiver:
1. Connet the receiver to FC and run the BF.Choose the correct port
and type of your receiver on the flight controller.
2. Type: set spektrum_sat_bind=9 in CLI then type ' save'.
3. Disconnect the power and repower. The light on the receiver will
flash quickly which means it's on binding mode.
4. Turn on the radio and select bind mode. Wait a moment.It means
bind successfully if the light on receiver keeps brighting.
5.
After binding. Type: set spektrum_sat_bind=0 and type 'save' to
quit the binding mode.
