© by N&W GLOBAL VENDING S.p.A.
25
01-2016 4875 00
Notes on
Programming
The electronic control unit of the machine controls the
use of many functions.
The programme of the machine contains a description of
all the foreseen functions, including those which, for the
specific configuration of the model (layout), are not used.
The machine is supplied together with:
-Selections layout, which contains the selections fore-
seen for the specific model
-Flow chart of the programming menu.
Described below is a summary of the main functions
which are useful for managing the operation of the
machine, not necessarily in the order in which they are
displayed in the menu.
The software version can be updated using the appropri-
ate systems (PC, UpKey, etc.)
The display messages which show the operation in
progress are steady-on, while any action requested of
the user flashes.
The status of the machine can be in three different
modes.
Depending on the status in which the machine is, the
buttons of the keyboard assume different functions.
N
ormal
us�r
-Machine start-up (door closure) with the execution of
the foreseen checks.
-Operations that can be done with the door closed.
-Dispensing selection and messages to the user.
l
oaD�r
m�Nu
-Detection of statistical data and execution of simple
checks on the operation and on the dispensed items.
t
�c�Nical
m�Nu
-Programming of the settings and of the performances
of the machine.
NORMAL OPERATION MODE
The message requiring the user to select a drink will ap-
pear on the display during the normal operation.
SELECT A
DRINK
The animation showing the drink preparation level is
displayed during the dispensing cycle.
BEING PREPARED
If the control system should find out a failure, an error
message will appear and specify the type of problem.
The keyboard is lit up in red according to settings.
Out of order
"failure name"
At the end of the dispensing cycle, the display shows the
message:
DRINK READY
SERVE YOURSELF
