© by N&W GLOBAL VENDING S.p.A.
40
01-2016 4875 00
MISCELLANEOUS
m
ac�iN�
Data
The machine can store a series of codes intended to
identify it at the time of acquiring statistics.
iNstallatioN
Dat�
Use this function to store the current system date - if
properly set up - as the installation date.
The date is printed at the time of rolling out statistics.
m
ac�iN�
coD�
This function is used to change the eight-digit numeric
code identifying the machine (0 by default)
op�rator
coD�
The function is used to change the six-digit numeric
code identifying the operator charged to manage groups
of machines (0 by default).
i
NitialisatioN
When the display is set to the “Initialisation” function, you
can initialise the machine by restoring all default data.
This function shall be used in case of a memory data
error or if the software is replaced.
All statistic data are reset.
Confirm to start the initialisation.
The following parameters are required:
“country”
understood as the type of basic doses for the various
selections
(e.g. IT coffee = 45 cc - FR coffee = 80 cc).
The “countries” made available according to models.
“lay out”
a well-defined number of Button-Selection combinations
is available for selection for every single model and type
of doses (the combinations available for every single
layout are supplied by the selection dose table supplied
with the machine)
Confirm the options to display the message “Running”
for some seconds.
“tank”
To define whether water supply occurs:
-ON: water supply from the mains
-OFF: water supply from the internal tank
-Equipped cabinet: from the tank without any signaller
Confirm the options to display the message “Running”
for some seconds.
“language”
To define the language used to display messages; use
keys
and
to scroll available languages.
