© by N&W GLOBAL VENDING S.p.A.
45
01-2016 4875 00
To clean the mixers, act as follows:
-rotate the product conveyor upwards
-rotate the water funnel fastening ring nut counter-
clockwise and remove the powder funnels, the powder
deposit drawers and the water funnels
-unscrew the mixer impeller; to unscrew, use a finger to
hold the toothed disk mounted on the whipper motor
shaft firm
Fig. 28
Sanitise by making use of sanitising products.
-dip the components into a container with the sanitising
solution you have prepared before for about 20’ and
make sure that you have mechanically removed visible
residues and films by using, if necessary, pipe cleaners
and brushes;
-rinse and carefully dry all parts
-reassemble the mixer impeller;
-re-position the water funnel and rotate the fastening
ring nut clockwise
-reassemble the powder deposit drawers and the pow-
der funnels
-rotate the powder conveyor downwards.
After having assembled the parts, act as follows,
any way:
-Wash the mixers and add some drops of the sanitising
solution into the various funnels.
-After having sanitised, rinse the parts abundantly to
remove any residue of the solution in use.
All the operations requiring the machine to be
directly connected to a source of electricity must
be ONLY
carried out by the personnel qualified and
informed on the specific risks involved.
cl�aNiNg
t��
milk�r
Nozzl�
Models with cappuccinatore only.
The milker nozzle consists of separable parts for easy
disassembling and cleaning.
To clean, act as follows:
-remove the milker nozzle from the nozzle support
-separate all parts and wash them by using detergents;
make sure that you have mechanically removed visible
residues and films by using, if necessary, pipe cleaners
and brushes
A
B
Fig. 29
A- Disassembly
1- B- Assembly