ZA-4000 User’s Manual
Set the Basic Wireless Parameters
Figure 7Wireless Settings
Operation Mode
The Device can work as CPE or WDS, choose the right mode depend your need. Default:
CPE.
Wireless Network Name
Enter a 32-character (maximum) Service Set ID in this field; the characters are case sensitive.
When in infrastructure mode, this field defines the Service Set ID (SSID). The SSID assigned
to the wireless node is required to match the SSID in order for the wireless node to
communicate with the remote Device.
Default: Wireless
BSSID
Enter a Basic Service Set ID in this field. When in infrastructure mode, this field defines the
Basic Service Set ID (BSSID). The BSSID assigned to the wireless node is required to match
the BSSID in order for the wireless node to communicate with the remote Device.
Default: 00:00:00:00:00:00
Notice:
- 14 -