ZA-4000 User’s Manual
λ
WEP 64 bit: 10 Hex digits (any combination of 0-9, a-f, or A-F)
λ
WEP 128 bit: 26 Hex digits (any combination of 0-9, a-f, or A-F)
λ
WEP 152 bit: 32 Hex digits (any combination of 0-9, a-f, or A-F)
λ
TKIP
:
you may input 8-63 characters or 64 hex (A-F or 0-9).
λ
AES
:
you may input 8-63 characters or 64 hex (A-F or 0-9).
Security Encryption (WEP) Keys
λ
Passphrase: To use the generated keys from passphrase, please enter a passphrase and
click Generate Keys button. You can also enter the keys directly. Only 8 to 63 characters
are allowed to be entered. Wireless stations or bridge must use the same keys to connect
with the AP.
λ
Key1~Key4: Select the key used as the default key. Data transmissions are always
encrypted by the default key. Other keys can only be used to decrypt received data. The
four entries will be disabled if WPA with Radius authentication option is selected.
Pear-to-Peer Mode Authenticator
When set device WDS Mode and choose Authentication Type is WPA-PSK or WPA2-PSK.You
should set one device is Authenticator and the other is Authenticated.
Notice:
λ
The device and the APs must have the same Authentication Type, Data Encryption and
Key; otherwise they cannot connect with each other.
- 19 -