3
1. Battery holder: For installing the battery with two 14.8V/12A Sony V-mount battery or power adapter.
2. Control operation panel: For diaplaying various function operations and data.
3. Handle: It is convenient for users to carry the host.
4. Power indicator: For determining the status of power input. Being on, power supply is normal. Flashing or being off,
power supply is abnormal or no power input.
5. Power switch: For on/off the fixture.
6. DMX OUT: DMX signal output interface.
7. DMX IN: DMX signal input interface.
8. DC power socket: DC power output.
9. DC power input: For connecting DC power to the lamp.
10. AC power input socket: For connecting the AC power cable to supply power to the adapter.
11. USB port: For updating the firmware.
12. Host output socket: To connect a DC cable for connecting between the lamp body and controller.
13. Angle fixing knob: Allows for vertical adjustments and fixing of the lamp.
14. Lock catch: For installing and disassembling reflector and other accessories.
15. Reflector: For gathering light to improve the central illumination.
16. Yoke: Designed for connecting the lamp to the light stand and adjusting the beam angle.
17. Umbrella hole: For installing/removing an umbrella.
18. Lamp body handle: Be convenient for users to lift the lamps and adjust the diection of the light.
19. Lamp body input socket: For connecting the lamp with power adapter.
20. Bracket fixing knob: For connenting the spot light and camera equipment , and adjusting the horizontal illumination
direction of fixture.
Detailed Description
