4
1. Power Connection
①
When connecting the power supply, please make sure the power, voltage and frequency is consistent with the provided power supply.
②
When using a v-mount battery, please make sure to turn off the fixture and then plug in the battery.
Note:
(
1
)
Please do not use too much force when installing the battery properly.
(
2
)
When removing the battery, make sure to press the battery unlock button to remove battery properly.
1. Yoke: For connecting the fixture to the light stand and adjusting the tilt and pan of fixture.
2. USB port: For updating controller firmware.
3. DMX IN: DMX signal input interface.
4. DMX OUT: DMX signal output interface.
5. Battery lock button: For installing and removing the battery.
6. Battery holder: For installing V-Mount battery (Not Included).
7. Angle fixing knob: For adjusting and fixing the tilt angle of fixture.
8. Fixture body handle: To lift the fixture and adjust the direction of the light.
9. User interface: For displaying & controlling various function operations and data.
10. Power indicator: For checking the status of the power input. If the indicator is always on, it means normal power supply; if the indicator is flashing or off, it means
abnormal power supply or no power input.
11. Power switch: For on/off the fixture.
12. DC IN: DC power input interface.
13. Bracket fixing knob: For connecting the fixture on a light stand.
Product Details
Usage
MixPanel60/MixPanel150 is designed to work with a 2.4G remote controller or Nanlite WIFl-APP via WIFl transfer device to control light remotely.
NOTE: 2.4G remote controller or WiFi transfer device sold separately. (See separate instructions for remote controller or Wi-Fi transfer device)
2. 2.4G Wireless Remote Control
4+
3+
1-
2-
1-
2-
4+
3+
DC
IN