WWW.NANLUX.COM
46
DIM: 100.0%
EFFECT: HUE LOOP
EFFECT MODE
CH: 512
SMART
HUE1: 0 HUE2: 360 SAT:100%
SPEED: 8s CYCLE: TWO WAY
ADD-ON:
FLASH
INTERVALS: 1.0s FLASH RATIO: 50
DIM: 100.0%
EFFECT: HUE LOOP
EFFECT MODE
CH: 512
SMART
HUE1: 0 HUE2: 360 SAT:100%
SPEED: 8s CYCLE: TWO WAY
ADD-ON:
FLASH
INTERVALS: 1.0s FLASH RATIO: 50
DIM: 100.0%
EFFECT: HUE LOOP
EFFECT MODE
CH: 512
SMART
HUE1: 0 HUE2: 360 SAT:100%
SPEED: 8s CYCLE:
ONE WAY
ADD-ON: FLASH
INTERVALS: 1.0s FLASH RATIO: 50
DIM: 100.0%
EFFECT: HUE LOOP
EFFECT MODE
CH: 512
SMART
HUE1: 0 HUE2: 360 SAT:100%
SPEED: 8s CYCLE:
TWO WAY
ADD-ON: FLASH
INTERVALS: 1.0s FLASH RATIO: 50
·
There are three cycle modes in HUE LOOP: ONE WAY, TWO WAY and REVERSE, rotate the "middle knob" to select.
·
There are four add-on effects in HUE loop: OFF, FLASH, RANDOM FLASH and PULSE, rotate the "middle knob" to select.
Rotate the "middle knob" to select cycle mode.
Note: (1) When the cycle mode is in one way or two way, press the "right knob" to cycle from HUE 1.
(2) When the cycle mode is in reverse, press the "right knob" to cycle from HUE 2.
Rotate the "middle knob" to select the add-on effect.
OFF
FLASH
RANDOM FLASH
PULSE
Note: (1) When the ADD-ON is off, there is no additional effect in the HUE LOOP.
(2) When the ADD-ON is FLASH, there is flash effect in the HUE loop, flash can be set by adjusting the INTERVALS (range: 0.1s-10s) and FLASH RATIO (0-100).
(3) When the ADD-ON is RANDOM FLASH, there is flash effect in the HUE loop, flash can be set by adjusting the FLASH SPEED (range: 1-100).
(4) When the ADD-ON is PULSE, there is pulse effect in the HUE loop, pulse can be set by adjusting the PULSES/MIN (range: 1-240).
ONE WAY
TWO WAY
REVERSE
