35
Safety Precautions
1. Please open the package to check for damage caused in transit, if damaged please do not use and contact place of purchase or manufacturer as soon as possible.
2. Do not use a power cable with damaged insulation. Do not unplug hard or drag the power cable directly.
3. Ensure the power supply's voltage matches the voltage specified by the fixture before installation.
4. When cleaning or not using the light, please turn it off.
5. Stored the light safely and away from children.
Notice
1. Do not place any object on the light emitter.
2. Don't place objects on the light or allow liquid to follow inside the fixture or the emitter.
3. Don't place the light near flammable substances like alcohol or gasoline.
4. When cleaning the light, please wipe off debris or dirt by using a dry cloth with clean water or neutral cleanser.
5. The light should be operated safely where it won't be at risk of getting wet or under extreme temperature.
6. Don't repair the light by yourself. Attempts to self repair will void warranty, for repairs please turn to place of purchase.
7. When using the fixture for a long time, the temperature of the fixture is high, please pay attention to anti-scalding.
General Fault Detection and Diagnosis
If the failure is not resolved after troubleshooting, please contact place of purchase.
The light won't boot up properly!
Diagnosis
Fault Detection
LCD display is on,
but can't operate the light.
The fixture can operate by manual,
but DMX control is not working.
1. Please check the LED indicator. If flashing or not on at all, please check whether the connection between power
adapter, power cable and outlet connection is properly connected or loose.
2. Please check wether the voltage value is within the specified paremeters.
1. Please check whether the DMX original adress setting of the fixture is correct or not.
2. Check that the XLR signal cable is connected correctly or is damaged.
Please check if the LCD display shows " ", long press the "LOCK" key to release the LOCK.
