background image

27

S04

 

 ENGINE WARRANTY

EPA WARRANTY

EPA  and  CARB  warranties  only  apply  to  new  engines 

having the certification label affixed to the engine and 

sold as stated above in the geographic areas. 

The presence of an EU number signifies that the engine 

has  been  certified  with  the  European  Union  countries 

per Directive 97/68/EC. The EPA and/or CARB emissions 

warranties do not apply to the EU countries.

When applied onto engine, Emission Control label must 

never  be  removed  from  engine  block  neither  covered 

with a layer of paint. This label is the evidence showing 

that the engine is meeting U.S emissions regulations. It 

must be kept available at anytime once the vessel has 

entered waters being in the scope of the North American 

Emission Control Area (ECA).

EMISSION CONTROL SYSTEM(S) LAWS

The U.S. EPA and CARB prohibit the removal or render

-

ing inoperative of any device or element of design in

-

stalled on or in engines/equipment in compliance with 

applicable emission regulations prior to or after the sale 

and delivery of the engines/equipment to the ultimate 

purchaser.

EUROPEAN UNION (EU) DECLARATION OF EMISSIONS 

CONFORMITY

The  presence  of  an  EU  number  on  the  label  signifies 

that  the  Marine  Diesel  Engine  has  been  certified  with 

the European Union countries per Directives 97/68/EC 

as  amended  by  Directive  2004/26/EC.  The  EU  engine 

family is listed on the Emissions Label. 

When installed in accordance with the manufacturer’s 

instructions,  Nanni  Industries  Marine  Diesel  Propul

-

sion  Engines  without  integral  exhaust  certified  under 

Directive 97/68/EC as amended by Directive 2004/26/

EC  produce  exhaust  emissions  of  carbon  monoxide, 

hydrocarbons,  nitrogen  oxides  and  particle  emissions 

complying  with  the  requirements  of  the  Recreational 

Craft Directive 2003/44/EC.

Summary of Contents for N13.430 CR2















































































































Reviews: