background image

56

TURBOCHARGER

 CAUTION !

A turbocharger is an exhaust-driven mechanical device 

that boost engine power by pumping more air into the 

engine. A turbocharger uses a pair of fan-like castings 

mounted on a common shaft. One (called the turbine) is 

piped to the exhaust, while the other (the compressor) 

is piped to the engine intake. The flow of exhaust spins 

the turbine, which causes the compressor to turn. The 

compressor serves to blow air into the engine at a 

greater rate than it can pull it in on its own. The greater 

volume of air can be mixed with a greater volume of fuel, 

which increases the power output.

Principle of operation of a turbocharger. 

TURBO SERVICE 

Engine turbochargers are designed to provide long 

years of trouble free service, which if required, can 

only be performed by a specialized workshop. In view 

to maintain turbochargers performances for as long as 

possible, some basic rules must be followed.

Changing or cleaning the air filters on a regular basis is 

a good way to keep debris from causing problems with 

the intake side of turbochargers.

A  turbocharged  engine  will  definitely  need  more  oil 

changes than an ordinary atmospheric one, as the 

turbines axle requires excellent lubrication. For this 

reason, oil characteristics must be followed closely. 

Never use low grade bargain lubrication oil.

Turbochargers get very hot when engine is running and 

a protective metal shield or thermal sleeve is always 

affixed  onto  the  exhaust  side  to  prevent  burns.  Never 

remove these shields.

Do not get confused : a turbocharger is driven by 

exhaust gases. On a supercharger, the air intake turbine 

is driven by a belt. In addition to a rotation speed far 

lower compared to a turbocharger, an amount of output 

power is subtracted fom the engine because of the drive 

system.

Above picture: N9CR2 Turbo & Air intake.

There is no serviceable part for the end user 

inside turbochargers. Any attempt to 
disassembling would lead to a total failure.

S08

 

 MAINTENANCE 

Summary of Contents for N9.330 CR2













































































































Reviews: