2.8.2 Loop Recording
Loop
recording
allows you to set the duration that the camera will record before
creating a new clip. To set the clip length please follow the instructions below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2.
Press the
M
Button to enter the
Video Menu.
3.
Use the
<
and
>
Buttons to navigate the
Video Menu
and highlight the
Loop
Recording
setting and press
OK
to select.
4.
Use the
<
and
>
Buttons to highlight your required Clip Length, then press the
OK
button to confirm your selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2.
Selecting the OFF option will create the longest possible clip, in most cases depending on
the set resolution and other factors this will be limited to 10MB.
3.
To avoid filling the card quickly it is advised to use the 2 or 3 minute options.
2.8.3 WDR
The
WDR
setting increases the dynamic range of the camera. To turn this setting on
or off, please follow the instructions below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2.
Press the
M
Button to enter the
Video Menu.
3.
Use the
<
and
>
Buttons to navigate the
Video Menu
and highlight the
WDR
setting and press
OK
to select.
4.
Use the
<
and
>
Buttons to highlight either OFF or ON, then press the
OK
button to confirm your selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
12
