GB
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
45SC2 45CC3 45CC4 60SC2 60CC3 60CC4 90SC2 90CC3 90CC4
IMPORTANT SAFETY NOTES
INITIATION
<< The machine may not be operated by more
<< Danger of injury!
Keep all
AREA OF APPLICATION:
than one person at any given time!
loose articles of clothing, ties,
The
intimus 45/60/90SC2/CC3/CC4
data
jewelery, long hair or other loose
shredder is a machine used for shredding general
documents and
The machine was designed for safe operation
by “one person only”.
objects away from opening!
data carriers such CD’s, DVD’s, credit cards and
3.5” diskettes.
<< Danger
of
injury!
Never insert fi ngers into
The machine must only be used to
<< During the shredding process no other
opening!
shred paper, credit cards and CD’s,
work may be performed on the machine
DVD’s and 3.5” diskettes.
(for example cleaning, etc.)!
Shredding other sorts of data carriers
<< In case of danger switch the machine off
may cause damage to the machine (e.g.
with the main switch, or with the emergency
damage to the cutters etc.).
<< The machine is not a toy, and is not suitable
switch, or unplug the machine!
for use by children!
INSTALLATION:
<< Always unplug the machine from the
- Unpack the machine and put it together.
The overall technical safety concept of
main power supply before opening the
- Fit the plastic bag onto the bag frame.
this machine (dimensions, feed openings,
- Connect the machine to the power with the plug
emergency shutdown devices etc.) does not
machine!
(1) (Fig. 2) (For information on the right fuse for
provide for any guarantee regarding hazard-
Repairs may only be performed by trained
the plug see “TECHNICAL DATA”).
free operation by children.
personnel!
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
OPERATION
CONTROLS:
1 = Main plug (fi g. 2)
When the machine is first plugged in it is
not on.
2 = Function button (fi g. 1)
“Ready”/ “Off” / “Stop“
This button has three functions:
a) “Ready”
The machine changes to “Ready” if you
press this button briefly.
At the same time the integral LED
display
comes on.
b) “Off”
The machine switches off if it is in the
“Ready” mode and the button is held
down for about 3 seconds.
Note:
The machine switches off
automatically if it is not used for about 5
minutes.
c) “Stop”
If you press this button briefl y when the
cutters are running they switch off and
stop.
3 = Forwards button (fi g. 1)
This button has two functions:
a)
If this button is pressed briefl y, the
cutting mechanism runs forwards for a
few seconds, e.g. to remove remaining
material from the cutting mechanism.
At the same time the integrated LED
display
lights up.
b)
If this button is pressed and held
for approx. two secs., the cutting
mechanism runs forwards continually
and materials to be shredded can be fed
into the machine. At the same time the
integrated LED display
lights up.
4 = Reverse button (fi g. 1)
If you press this button the cutters run
backwards for a short time. At the same
time the integral LED display
comes on.
5 = Light barrier (Forward motion) (fi g. 3)
The shredding procedure starts as soon
as material is fed into one of the two feed
slots. At the same time the integral forward
button LED display
comes on.
6 = Control display (fi g. 1)
“Material jam in machine”/
“Simultaneous material feed” / “Light
barrier covered when door opens or
when machine turned on”
For the procedures see the relevant
description under the “MALFUNCTION”
section.
a) “Material jam in machine”
Comes on when too much material has
been fed into the cutters. The cutters
jam, then run in reverse for a short time
and stop. The motor switches off.
b) “Simultaneous material feed”
Comes on when material has been fed
into both slots at the same time. The
cutters stop, then run in reverse for a
short time and stop. The motor switches
off.
c) “Light barrier covered
when door open”
Comes on when there is still material in
one of the two feed slots when the door
is opened. The cutters stop. The motor
switches off.
d) “Light barrier covered
when machine turned on”
Comes on when there is still material
in one of the two feed slots when the
machine is switched on.
3
9
10
11
4
6
7
8
2
1
12
13
5
fi g. 1
fi g. 2
fi g. 3
5
http://www.monomachines.com/
http://www.monomachines.com/
