UAB “ Nano sensorics”
🎯
Pakaunės g. 70, LT-47243 Kaunas
The sensor is for indoor use;
Do not disassemble, crush, puncture, short internal circuits;
Remove batteries if the sensor is not used, discharged battery has to be removed from the battery sensor,
in this case left batteries might leak and damage the sensor;
Keep the battery or device dry and away from water or any liquid as it may cause a short circuit;
Replace batteries only with the same or equivalent type recommended by the manufacturer;
Discard used batteries according to the manufacturer’s instructions;
Do not bend, deform, shred, microwave, paint the sensors, or other hardware;
Do not insert external material into any opening on the sensors;
Disassembling or puncturing the battery (whether integrated or removable) can cause an explosion or fire;
Do not dry the sensors or battery with an external heat source such as a microwave oven or hairdryer;
Observe proper precautions when handling batteries. Batteries may leak or explode if improperly handled;
The sensor is not applied as a metrological, commercial accounting purposes and UAB „Nano sensorics“
will not be held liable for any damage which may result from inaccurate readings;
Do not use any detergent or alcohol to clean the device;
Clean gently with softly moisture cloth.
Waste disposal
The sensor disposed according to the Waste Electrical and Electronic Equipment Directive, (WEEE Directive)
2012/19/EU. The sensor and its individual parts has to be disposed according to local
laws and regulations your product should be disposed of separately from household
waste and industrial waste. When this product reaches its end of life, you have to bring
the sensor, its components to the collection point designated by local authorities in
order to protect the environment and to reduce waste through recycling. The battery
must be disposed of separately.
Sensor technical details
Sensing characteristics
Temperature
-10 to 70 °C
Temperature
Accuracy
Max '+/-0.4°C@ -10°C
－70
°C
Humidity
0 to 100 % RH (non-condensing)
Humidity Accuracy
"+/-4%RH @20°C, >80% "+/-7%RH @20°C
CO2 Measurement
range
400 – 5000 ppm, extended range 10,000 ppm
CO2 Accuracy
±30 ppm ±3% of reading, (extended range ±10% of reading)
Mechanical specification
Weight
80 g without battery
Dimensions
86 x 86 x 25,5 mm
