UAB “ Nano sensorics”
🎯
Pakaunės g. 70, LT-47243 Kaunas
Supported
LoRaWAN®
features
OTAA, ABP, ADR, Adaptive Channel Setup
Supported
LoRaWAN®
regions
EU863 – 870
Optional: US902 – 928, EU863 – 870, AU915 – 928, EU433, RU864, IN865
Link Budget
137 dB (SF7) to 151 dB (SF12)
TX Power
14dBm±1dBm (Region specific)
Rx Sensitivity
132 dBm (LoRa, Spreading Factor=12, Bit Rate=293bps)
-118 dBm (FSK, Frequency deviation=5kHz, Bit Rate=1.2kbps)
Communication
range
10 km (line-of-sight, actual transmission distance depends on the environment)
Data sizes
Measurement
Data size
Elaboration
Temperature
2
MSB byte -128 to +128 C, LSB byte, value after decimal point 0 to 100
Humidity
1
One byte integer value (0 to 100%)
Battery
2
MSB byte represent Volts before decimal point , LSB byte represents two digits
after decimal point expressed as unsigned 2 byte value, first byte – integer
Volts, second byte – Volts (two digits after decimal point)
VOC
2
0 - 65535 BIN (Actual value 0 – 500)
Transportation and Storage
Packed sensors may be transported in any type of covered vehicle. Equipment should be anchored reliably to avoid
shock and possibility to shift inside vehicle. Sensors should be protected against mechanical damage and shock. No
aggressive chemical substances should be stored together because of corrosion hazard.
Warranty
Manufacturer gives warranty that sensor parameters will meet the technical requirements, listed in the “Sensor
technical details” paragraph of this document, if transportation, installation, storage and operation conditions will
be followed. Warranty period is 1 year from manufacturing date, with additional possibility to extend it for
additional charge. Warranty apply, when device is used as intended and if there was no tampering done with the
device or other external damage done to the device from outside sources.
