12
heatless desiccant air dryer
D3
4.2 emergency stop - standard controller
•
Turn to unlock latch & open front door
•
Locate flying lead at bottom of controller
•
Remove the insulation from the flying lead
•
There are six wires;
1. Brown Wire - 24V DC Output
2. Blue Wire
- 24V DC Output
3. Black Wire - Remote Start/Stop Input
4. White Wire - Alarm Input (Zero volt contact)
5. Green Wire - Alarm Output (Zero volt contact)
6. Red Wire
- Remote Stop Input
•
To set up the Emergency Stop, create a connection between the Red and Blue wires via a central relay or swith
•
If a 24V output is connected to the red wire the dryer will automatically switch off and enter standby mode, displaying
remote stop is active.
