Page 20
nano-purification solutions.
17-110-1494
All responsibility regarding quality of breathing air lies with the user. Compliance with
any federal, state, provincial or local regulations are the sole responsibility of the user.
All nano breathing air products meet or exceed the standards set forth in CGA Grade D
specifications for air quality as set forth by OSHA (USA) and CSA Z180.1 (Canada).
When the breathing air equipment is used in accordance with the instructions as set forth
by nano-purification solutions, the breathing air system meets or exceeds all breathing air
standards currently in force. The user is responsible for installation and compliance with
any localized regulations and should be up to date on any and all changes which may have
occurred to specifications.
The air compressor needs to be located in a safe and clean ambient location and
the location should be tested periodically to ensure the compressor is ingesting and
compressing air suitable for downstream treatment by the breathing air system. The
compressed air breathing system outlet quality should be tested at initial start-up and put
on a preventative maintenance schedule of testing. If conditions or location of the breathing
air system is to change, outlet breathing air should be retested and validated prior to use.
Proper preventative maintenance of the system should be documented and maintained
based on recommended maintenance of the manufacturer.
Grade-D (USA) or CSA Z180.1 testing (Canada) should be carried out and documented.
These tests should analyze at a minimum: Carbon Monoxide, Oxygen, Carbon Dioxide,
Water content, Hydrocarbon content and total particulate level. The actual allowable levels
are clearly documented in the Technical Specification section.
When in doubt, please consult factory.
15. Quality Statement
nano-purification solutions inc.
5509 David Cox Road
Charlotte NC 28269
USA
Telephone: +1 (704) 897-2182
Fax: +1 (704) 897-2183
Internet:www.n-psi.com
E-mail:support@n-psi.com
nano-purification solutions ltd.
Dukesway,
Team Valley Trading Estate,
Gateshead,
NE11 0PZ
United Kingdom
Telephone: +44 (0) 191 497 7700
Internet: www.n-psi.co.uk
E-mail: enquiries@n-psi.co.uk