Filtrating half-mask providing
highest possible protection
CLASSIC FFP3 NR
The highest possible level of protection against viruses and bacteria
BreaSAFE
®
CLASSIC FFP3 NR respirator has been
developed as a protection against
microorganisms. If the respirator is used for this
reason, it can be safely worn for several days
(approx. 1 to 2 weeks, according to the
environment, activity and proper care) which
makes it a completely unique product on the
market in terms of quality-efficiency-price ratio.
The individual components have been carefully
selected in order to enable disinfection of the
respirator, which extends its lifetime and improves
user’s comfort.
Testing did not include test of dust contamination
(DRB 4/15 dolomite dust). Therefore, the respirator
can be used as a Personal protective aid (e.g. for
industrial usage) for a time equivalent to one work
shift (NR marking). The respirator cannot be
cleaned from dust contamination.
An internal study has proved that even
14-time treatment with recommended
disinfectant did not cause any reduction of
breathability, damage of outer or inner layer
of the respirator and, above all, reduction of
filtrating efficiency of used membrane.
If you decide to use the respirator for
protection against microorganisms, we
recommend to treat the respirator:
•
after each use (due to a possible
contamination caused by manipulation
with the respirator),
•
with a spray disinfectant based ideally on
alcohol or isopropyl alcohol,
•
with heat in a hot-air sterilizer or an
autoclave at maximum temperature of
70 °C for 30 minutes.
Due to the risk of damage to the mem-
brane we do not recommend:
•
to use disinfectant agents based on
hydrogen peroxide,
•
to exceed recommended maximum
temperature of 70 °C during sterilization
in a hot-air sterilizer or an autoclave,
•
to sterilize by a UV lamp or ozone,
•
to place wet, disinfectant-treated
respirators into an autoclave or a hot-air
sterilizer (risk of ignition of disinfectant
vapors).
Do not use the respirator if:
•
harmful particles have penetrated the
respirator, and pollution, foul odor or
other sign of penetration of pollutants
has been discovered,
•
breathing resistance of the respirator has
significantly increased.
Protection against
microorganisms
All about
BreaSAFE
®
products:
www.breasafe.com
www.nano4fibers.com
FFP3
Capture rate
≥ 99 %
CAPTURE EFFICIENCY
96,5
97
97,5
98
98,5
99
99,5
100
0
0,2
0,4
0,6
0,8
1
1,2
1,4
Filtration efficiency
(%)
Particle size (micrometers)
Filtration efficiency
VIRY
BACTERIA
VIRUSES
