26
Safety Precautions
Review and follow the safety instructions below :
Always ensure that the power supply input voltage matches the voltage available at your location.
To avoid the danger of electric shock, install the instrument per the environmental specifications
described in “Technical Specifications”. If water or other material enters the instrument, the adaptor, or
power inlet, disconnect the power cord and contact an authorized service person.
Do not touch the main plug or power cord with wet hands.
This machine is air-cooled so its surfaces become hot during operation. During installation and use, leave
more than 10 cm (4 inches) free from wall around the device.
Do not install the instrument on a slant or a place prone to vibrations. It will cause instrument mal-
function and damage.
Never insert any objects (especially metallic) into the air vents of the instrument as this could result in
electrical shock, personal injury, and equipment damage.
To avoid a potential shock hazard, always connect the grounding terminal of the instrument and that of
the wall outlet properly. The power cord should be connected to a grounded, 3-conductor power outlet.
Position the device so that there is sufficient length for the cables and their respective connections.
Lock the stage before moving, turn off the power button and unplug the power cord.
If the instrument is broken or dropped, disconnect the power cord and contact an authorized service
person. Do not disassemble the instrument.
Only use authorized accessories.
Use this equipment only as specified in this manual and as specified in any documentation associated
with its components. Use of the equipment in an unspecified manner may result in damage to the device
or injury to the user.
