Operation
JuLI™ Stage - User Manual
41
Navigation position set
To select all wells click
Select All
.
After selecting one or multiple wells, clicking
Add
Position
will add the center
position of each selected well to the
Position list
.
There are two ways to proceed if more than one position inside a well is
supposed to be measured in only selected or in all wells of the measurement:
o
Select wells first, then select e.g. 5 positions inside the well via mouse click
and then click
Add Position
.
o
Select wells, then select one more position inside the well, click
Add
Position
, select wells, then select a third position, click
Add Position
and
so on.
Both ways allow the user to create measurements, where different wells can
but must not have identical measurement positions inside the wells.
Default
selects the center position for all selected wells
Undo
deletes the last assigned position.
The
Position List
contains all positions for imaging including the X, Y, and Z
coordinates.
Clear
will delete all positions from all selected wells.
Summary of Contents for JuLi Stage
Page 1: ......
