Nanoptix PayCheck Slim, Service Manual

Document # 720006-0000 
August, 2011 

iii

Service Manual

Information to the User 

This equipment must be installed and used in strict accordance with the manufacturer's 
instructions. However, there is no guarantee that interference to radio communications will not 
occur in a particular commercial installation. If this equipment does cause interference, which can 
be determined by turning the equipment off and on, the user is encouraged to contact Nanoptix 
Inc. immediately. 
 
Nanoptix Inc. is not responsible for any radio or television interference caused by unauthorized 
modification of this equipment or the substitution or attachment of connecting cables and 
equipment other than those specified by Nanoptix Inc. The correction of interferences caused by 
such unauthorized modification, substitution or attachment will be the responsibility of the user. 
 
In order to ensure compliance with the Product Safety, FCC and CE marking requirements, you 
must use the power supply, power cord, and interface cable, which were shipped with this 
product or which meet the following parameters: 

 
Power Supply 

UL Listed power supply with standard 60Hz-50Hz, 100-240VAC input and 24VDC output 
equipped with AC line filtering, over-current and short-circuit protection.  
 
Use of this product with a power supply other than the Nanoptix Inc. power supply will require you 
to test the power supply and Nanoptix Inc. printer for FCC and CE mark certification. 

 
Communication Interface Cable 

An approved Nanoptix interface cable must be used with this product.  Use of a cable other than 
Nanoptix approved product will require that you test the cable with the Nanoptix Inc. printer and 
your system for FCC and CE mark certification. 

 
Power Cord 

A UL listed, detachable power cord must be used. A power cord with Type SVT marking must be 
used. For applications outside the North America, power cords that meet the particular country’s 
certification and application requirements should be used. 
 
Use of a power cord other than described here may result in a violation of safety certifications that 
is in force in the country of use. 

 
Industry Canada (IC) 
Radio Frequency Interference Statement 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulations. 

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le 
matériel brouilleur du Canada.