Weighted Tube
Instruction Manual
Micro-Particle
Cleaning Gun
EG - 1002
Grip
Outlet
Cleans carpets, plastics, and upholstery interior. Blast cleaning solution into crevices
unable to reach by hand. Low moisture, atomizes cleaner and detergent into1~10μm.
Please use the micro-particle cleaning gun in the safe, and secure environment. Read
the direction for use carefully, before you use the cleaning gun.
Trigger / Handle:
Hold it, spraying the liquid;
release it, stop spraying the
liquid
ON/OFF Spray Control
Valve:
Swift Between the Spray/Liquid
Air Adjusting Valve:
Control the distance and
form of the spraying foam
Supplement of Liquid:
Open the cover by screwing in
clockwise direction, fill with liquid
, and fasten the cover.
●
The pressure must be set between 0.5 to 0.8MPa; higher pressure (>0.8MPa)
may cause damage to the equipment and dangerous event.
●
Use ONLY neutral liquid.
●
Specially note that organic solvent even in neutral feature cannot be used,
because it contains enormous factors might cause deterioration
Installation/detaching
the bottle:
Please hold the bottle while installing
or detaching . It might cause the
breakdown as the joint part of the
valve comes off when an upper
T part is turning.
Air Pressure of 1.0MPa
or higher
Higher pressure (>0.8MPa) may
cause damages to the equipment
and creates dangerous event.
Please set knob from 0 and below
0.5.Please refer the left graph for
instruction of using1~2 MPa.
Warning
Notice
Warning
1
