Case fans installed at the top of the case should exhaust air out of the case (fan rear side
facing outwards). Please note to keep the Air Chimney opened when you have mounted fans
under the top.
5.3 Fan at the bottom of the case
If you want to mount a 120 or 140 mm fan at the case bottom, you must remove the HDD
mounting-rail, which is attached with four screws to the bottom.
Please place the fan on the inside of the case and secure it from the outside..
An additional case fan at the bottom of the case should be mounted so that cooler air is
introduced into the case (fan rear side facing inwards).
6. The I/O-Panel
The I/O panel includes connectors for external
USB devices (2 x USB 3.0, 1 x USB 3.1 Type C),
and the microphone and headphone ports.
The power-, reset-, and LED On/Off button are
located here as well.
Please connect the USB 3.1 connector exter
-
nally to your motherboard.
Lead the cable through the appropriate slot
cover.
09
Summary of Contents for CoolForce 1
Page 1: ......
