Nanoxia CoolForce 2, Instruction Manual

Please place the fan on the inside of the case and secure it from the outside.

An additional case fan at the bottom of the case should be mounted so that cooler air is 

introduced into the case (fan rear side facing inwards).

6.4 Fans on the Nanoxia ModuWand

If you want to mount additional fans inside the 

case, for example to optimize disk ventilation, you 

can use the Nanoxia ModuWand. 

For this, you first have to remove the ModuWand 

(

see chapter 3

). 

The ModuWand offers mounting holes both for 

120 and 140 mm fans; install the fans accordingly 

and put the Nanoxia ModuWand back into the 

case. 

Please note that installing fans on the outer 

side of the ModuWand will limit the available 

space for the installation of long VGA cards. 

The use of 120 mm fans on the outer side 

of the ModuWand in combination with 3.5 

inch HDD on the inner side (or the other way 

round) can cause incompatibilities. 

If you install case fans in the mounting bra-

cket, those should support the movement of 

air from front to back.

11