Nanoxia CoolForce 2, Instruction Manual

EN

Attach the included EPS extension cable on to your motherboard – do not connect it to the 

power supply yet. Next you should mount the CPU cooler - for very large CPU coolers, the 

attachment of the EPS extension cable after installation can be difficult.

In the next step place the motherboard 

gently inside the case and lead the EPS 

extension cable through the opening 

provided in the top left of the mainboard 

tray. Fix the motherboard to the mother-

board tray. After the installation of the 

power supply, you can connect the EPS 

extension cable to the EPS-connector on the 

PSU at the back of the motherboard-tray.

2. Installation of optical drives and removal of the 5.25 inch cage

You can install up to two external drives 5.25 inch drives in the CoolForce 2.

2.1 Installation of optical drives

To install optical drives, please remove both side panels. The installation of optical drives 

requires neither screws nor tools.

Remove the 5.25 inch cover by pushing it 

gently but steadily from the inside out

In order to reach the tool-free locks on the left 

side of the case (as seen from the front), please 

remove the cover inscribed with “Designed in 

Germany” in front of the 5.25 inch cage. 

Loosen the lock on both sides by dragging the black slider backwards. Then slide the drive into 

the desired position. Lock the holder by pushing the slider back to its original position.

04