EN
4. Installation of hard drives
Install the 2.5 or 3.5 inch hard drives in the illustrated mounting frames. In order to extract the
frame, squeeze the protruding brackets and pull the slide out gently.
To install a hard drive into a bracket insert the disk so that the connectors point to the back and
attach the hard drive using the screws provided.
For the fitting of 3.5 inch hard drives please use the holes in
Figure 4A
(
marked red
).
For the fitting of 2.5 inch hard drives please use the holes in
Figure 4B
(
marked red
).
The hard drives slides offer a second pair of mounting holes, so it is possible to shift the posi-
tion of the drives. Those are marked in
blue
on the picture.
To lock the drive, push the bracket with the
drive back installed back into the slot until
the bracket is re-engaged.
figure 4A
figure 4B
10
Summary of Contents for DEEP SILENCE 2
Page 1: ......
