Open the two quick release locks of the 5.25 inch bay and remove the mounting frame. Then
attach the card reader in the frame, as shown below. Then place the frame with the card
reader back into the slot and lock the quick release. Finally, attach the included 3.5 inch
adapter to the front cover over the card reader.
3. Installation options of HDD’s
In the Deep Silence 3 you can mount up to five 3.5 inch hard drives (decoupled), as well as
three 2.5 inch HDD / SSD in three HDD cages. The middle HDD cage is modular and can be
removed or transferred to the secondary holder
3.1 Mounting of hard disk drives
Install the 2.5 or 3.5 inch hard drives in the illustrated mounting frames. In order to extract the
frame, squeeze the protruding brackets and pull the slide out gently. This applies both to the
2.5 inch and the 3.5 inch drive sleds.
Mounting of 3.5 inch drives
(3.5 inch sled)
Mounting of 2.5 inch drives
(3.5 inch sled)
Mounting of 2.5 inch drives
(2.5 inch sled)
To lock the drive, push the bra-
cket with the drive back
installed back into the slot until
the bracket is re-engaged.
05
Summary of Contents for Deep Silence 3
Page 1: ......
