background image

If you are missing any of the items listed above, please contact our customer service 
immediately: support@nanoxia-world.com 

Features:

 - Watercooling ready

 - Complete customizable soundproofing with high quality materials meeting industrial standards

 

 - 6 x 2.5 inch mounting frame

 - Tool-free mounting of optical drives

 - 2 x USB 3.0, 2 x USB 2.0 

 - 10 Slots for expansion cards

 - Max. VGA length: 338 mm (up to 468 mm with the HDD cages removed)

 - Room for CPU coolers with a maximum height of up to 185 mm

 - Mounting hole for CPU cooler in the motherboard tray

 - Cable management with 9 rubberised holes in the motherboard tray

 - Stepless 2-channel fan control for up to 6 fans

 - Nanoxia VentCover (noise indulated): 2 x top cover

 

Noise Insulation

 

The Nanoxia Deep Silence 5 Rev. B has been developed with the aim to offer the buyer a low-

noise case, while at the same time allowing for extremely low system temperatures. The sound 

insulation design is based on multiple interacting design elements:

The most important part is the large scale lining of the case with sound-absorbing insulation 

materials. These materials are manufactured specifically to meet the requirements of the 

developers of the Nanoxia Deep Silence case series and act equally against airborne sound and 

structure-borne noise.

 

Included are special rubber seals which can be used to alternatively close the tube holes above 

the rear chassis fan, in case you don’t need to use them.

03

Summary of Contents for Deep Silence 5 Rev. B



















Reviews: