EN
You can remove the fan by pushing away the
retaining lugs a little bit from the fan and then
pull the fan out (
picture 6B
).
The dust filters can easily be pulled out, as
you can see here (
picture 6C
).
Please note, that the filter elements must be fully inserted to guarantee the proper operati
-
on of the “Easy Access Panel”.
6.2 Fans under the top cover
If you want to install additional fans at the top of the case, please remove the Nanoxia VentCo-
vers first by removing the screws on the outside of the case.
Next, hold the fans from the inside and secure them to the top by fastening the screws from
the outside.
Case fans installed at the top of the case should exhaust air out of the case (fan rear side
facing outwards).
6.3 Fan at the bottom of the case
You can install a 120 or 140 mm fan on the bottom of the case. To do that, you must remove
the secondary HDD-cage mounting rail from the case bottom. We recommend the following
procedure:
a)
Remove the dust filter and unscrew the
screws on the two guide rails of the filter to
remove it.
picture 6B
picture 6C
13
Summary of Contents for Deep Silence 5
Page 1: ......
