Features:
Water Cooling ready
Drawer design with extractable motherboard tray
for easy hardware installation
Tempered glass
top cover
2 x USB 3.0, 1 x USB 3.1 Type C
2 Slots for expansion cards
Max. VGA card length: 270 mm
Room for
CPU coolers
with a maximum height of
up to 65 mm
Mounting hole for CPU cooler
in the motherboard tray
Cable management
with rubberized holes in the motherboard tray
Can be used
horizontal
as HTPC case or
vertical
as Mini Tower
RGB Rigid LED with controller
behind the front cover
On the next pages you can find some useful tips and explanations for the optimal use of your
new case and for the installation of your hardware.
II. Installation Instructions
For the installation of your hardware, please first pull out the drawer. For this, you need to
remove the four thumbscrews at the back of the case. You can pull the tray out partially or
completely – please keep in mind that the tray rests on wheels. For the installation we recom-
mend that you fix them.
1. Installing the Motherboard
You can mount Mini-ITX motherboards in the Project S Mini. Before installing the mother-
board, please attach the supplied stand-offs first. Attach the included EPS extension to your
mainboard.
Now place the motherboard gently inside the drawer and lead the EPS extension cable through
the opening provided in the motherboard tray. Fix the motherboard to the motherboard tray.
After the installation of the power supply, you can connect the EPS extension cable to the EPS-
connector on the PSU at the underside of the motherboard-tray.
2. Installation options for hard drives
You can install up to three drives in the Project S Mini. One 3.5 inch drive can be mounted at
the bottom in the front right corner; two additional 2.5 inch holders are available for the instal-
lation of SSDs.
03
Summary of Contents for PROJECT S MINI
Page 1: ......
Page 11: ...Nanoxia...