English
11
3. The cuff starts to inflate automatically. As the cuff inflates,
the monitor determines your ideal inflation level. The monitor
detects your blood pressure and pulse rate during inflation. The
cuff deflates automatically.
4. After a successful measurement, the display will show like the
example below
5. The measurement is stored and sent automatically to
your virtual Health Diary. You can access your data by login
in the Nantlife portal or by using the NantLife Application.
6. The monitor will automatically turn off 10 seconds after send-
ing the data through Bluetooth, or after 1 minute when it can-
not find a Bluetooth connection. The data is stored in the device
memory until a bluetooth connection is detected.
Notes: To STOP the inflation or measurement, press the button.
The monitor will stop inflating, start deflating and turn off.
2.7 Taking a Measurement
Sit in a chair with your feet flat on the floor, place your arm with
the cuff on a table or on your lap so the cuff is level with your heart.
Relax your arm.
1. Start the NantLife Blood Pressure Monitor by pressing the button
once. The NantLife logo will appear on the screen and stay for 2
seconds, then 00 values will appear for 10 seconds.
2. Press the button a second time to start the measurement.
