PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Before operating this polisher, it is
important to ensure that the
backing pad is secure. To do this,
hold the stop spanner (#49) on the
gear shaft and turn the pad
clockwise until tight.
NOTE: Make sure dead handle is
installed on appropriate side of
polisher for positive grip while
operating tool.
Let the polisher do the work. The
normal weight of the machine is
sufficient for efficient polishing.
Do not put excessive pressure on
the machine. This will only slow
down the speed of the pad, reduce
efficiency and put an additional
burden on the motor. Start the
polisher off work, set it down on
the work evenly and move it slowly
back and forth in wide, overlapping
areas. When finished polishing, lift
it off the work before stopping the
motor.
The speed of the polisher can be
regulated using the Air Regulator
slot on the top of the tool. When
the regulator shaft is rotated a full
quarter turn in either direction,
thee tool speed will go from
maximum to zero. Reposition the
regulator shaft within the quar-
ter turn until the desired speed in
obtained.
OPERATION
S
pecificationS
Overall Length . . . . . . . 16"
Net Wt. . . . . . . . . . . . . . 6.5 lbs.
Avg. Air Cons. . . . . . . . . 6 CFM
Air Inlet . . . . . . . . . . . . . 1/4"NPT
Hose Size . . . . . . . . . . . . 3/8" ID
Free Speed . . . . . . . . . . . 2500 RPM
Sound Level . . . . . . . . . . 90 dBA
WARRANTY POLICY:
NAPA ProfessioNAl Air Tools are warranted against defects in material and
workmanship for a period of one (1) year from the date of the original purchase. We will repair or replace at our
option any defective part or unit which proves to be defective in material or workmanship during this one year
period. All NAPA ProfessioNAl Air Tools must be repaired only by authorized NAPA ProfessioNAl Air Tool
service Centers. This warranty does not cover damage to tools rising from alteration, abuse, misuse and does not
cover any repairs made by anyone other than an authorized NAPA ProfessioNAl Air Tool Warranty Center.
Tools sent to a Warranty Center in a dissembled condition will not be covered as a warranty repair.
return tools to service Centers transportation prepaid. Be certain to include your name, address and phone
number along with proof of purchase information, with each tool.
®
Air Inlet
Air Regulator
