7
S E T T I N G T H E AL AR M ( AR M I N G ) W H E N L E AV I N G
Priority Arming.
If you attempt to arm with a faulted
Priority Zone
, a 3-second tone will
sound at the keypad, and "CAN'T/ArmZnF" will display in the window, indicating that
the trouble(s) must be corrected before the panel can be armed. A zone selected as
Priority Zone with Bypass
(check your Alarm Plan) may be bypassed if in trouble. If
the problem cannot be corrected immediately, press
C
, then arm the panel. A 3
second beep will sound at the panel to indicate arming with a Priority Zone in trouble.
Be sure to have the trouble repaired as soon as possible.
Silence Alarm.
If you enter your code while the alarm is sounding the message
"CAN'T/ArmSil" will be displayed. The system will silence the alarm and will be ready
to be armed again.
Alarm Sounding.
If you are attempting to arm with Easy Arm (Optional) and the alarm
is sounding, "CAN'T ArmSnd" will be displayed. The alarm will not silence. Only a
valid User Code will silence the alarm.
System Trouble.
If you enter your User Code with a system trouble present, the mes-
sage "CAN'T ArmRst" will be displayed. To arm, press
C
and the system trou-
bles should disappear.
A C O N
CAN'T/
ArmZnF
A C O N
CAN'T/
ArmSil
A C O N
CAN'T/
ArmSnd
T R O U B L E
A C O N
CAN'T/
ArmRst
