38
" V I D E O " B U T T O N > E N R O L L C A M E R A S ( C O N T ' D )
4. Type the
Wifi SSID
and
Wifi Password
of the Wi-Fi network to
which your mobile device is connected, then tap
CONFIGURE
.
Important:
Be sure the password is typed correctly or the
camera will not connect to your wireless network (tap
Show
if
you wish to view the characters).
5. Wait for the Wi-Fi connection to complete. When finished, the
live video feed will appear.
If Camera Does Not Connect
As you enroll multiple cameras, keep the cameras physically sepa-
rated to avoid Wi-Fi signal interference. Move the mobile device
closer to the router and retry. Verify the Wi-Fi password and SSID
are on 2.4GHz wireless network. Reset the camera (see the
Fac-
tory Reset
section in the instructions that came with the cam-
era), then repeat the above steps.
B. Configure Wi-Fi wirelessly
With this method, the network connection to the camera is configured
wirelessly.
1. Power camera. Wait for the camera green LED to flash slowly.
2. Tap the "QR Code Magnifying Glass" icon (located to the right
of the
Serial No.
field). Use the mobile device's camera to scan
the QR code of the video camera you wish to enroll (or tap with-
in the
Serial No.
field to type the characters manually).
3. Type the
Wifi SSID
and
Wifi Password
of the Wi-Fi network to
which your mobile device is connected, then tap
CONFIGURE
.
Important:
Be sure the password is typed correctly or the
camera will not connect to your wireless network (tap
Show
if
Live video feed of multiple ISV2 cameras in your iBridge system
