4
All technical manuals are available in PDF format at
tech.napcosecurity.com
Napco iSecure Security System
INTRODUCTION
NAPCO's
iSecure Security System
is an easy to install, state
-
of
-
the
-
art microcomputer
-
based burgla-
ry alarm system with integral cellular
communicator. Installation allows for
wall mounting or placement on a table
top.
iSecure
supports up to 80 wireless
protection zones that may be divided
into 1 or 2 Areas, each containing their
own protection zones. The basic system
can be easily expanded, with all Kits
compatible with the following standard
devices:
•
IBR
-
TOUCH
-
WL
Smart 7" Wireless
IoT Touchscreen Keypad
•
ISEC
-
WL
-
TOUCH
Wireless 4.3" Full Color Security
Touchscreen Keypad
•
ISEC
-
WL
-
KEYPAD
Wireless Battery
-
Powered Standard
Keypad
•
ISEC
-
WL
-
SIREN
Wireless Siren
•
ISEC
-
WL
-
MODULE
Wireless 8
-
Zone Takeover Module
•
ISEC
-
DW
-
XMITTER
Low Profile Window/Door Transmitter
•
ISEC
-
KEYFOB
4
-
Button Pendant/Keychain Transmitter
•
ISEC
-
SMOKE
Supervised Wireless Digital Smoke Sensor
•
ISEC
-
MOTION
Passive Infrared Motion Sensor
•
ISEC
-
GLASSBREAK
Wireless Glass
-
Break Sensor
•
ISEC
-
CARBON
MON
Supervised
Wireless
Carbon
Monoxide Sensor
•
ISEC
-
PANIC
Single Button Waterproof Panic
•
ISEC
-
HEAT
Wireless Heat Detector with Rate of Rise
•
ISEC
-
ZWAVE
Z
-
Wave Module
•
ISEC
-
WIFI
Internet Module
•
ISEC
-
2WF
-
MOD
2
-
Wire Fire Sensor Module
•
SLE
-
EXTANT
-
KIT
Adapter Cable for ANTEXT Kits:
•
SLE
-
ANTEXT30
30' Remote Antenna Kit
•
SLE
-
ANTEXT50
50' Remote Antenna Kit
•
SLE
-
ANTEXT75
75' Remote Antenna Kit
•
SLE
-
ANTEXT100
100' Remote Antenna Kit
See page 73 for ordering and additional information.
Re-
fer to our website for the latest revisions of the documentation
FEATURES
•
iPhone and Android phone apps allow for local and remote
arm / disarm, system status and Z
-
Wave control
•
Cloud
-
based programming in the
iSecure Cloud Web
Portal
(
www.iSecureByNapco.com
)
•
Integral 319MHz wireless receiver allows for compatibility
with all NAPCO 319MHz wireless transmitters
•
Integral 4
-
wire bus terminals that support the
GEMWV
-
RECV
(additional peripherals require power supply)
•
Integral Ethernet 10/100 network connection for central sta-
tion communication, notifications and
IBR
-
TOUCH
-
WL
op-
eration
•
Integral Hub siren with Burg, Fire and CO Alarm cadences
capable of 85dBA at 10 feet (
Note:
The Hub's integral siren
only activates upon an Area 1 alarm. All other external si-
rens activate upon an alarm in any Area.)
•
Integral voice prompts with 4 volume levels
•
Hub enclosure tamper available (WI2382LF Hub tamper in-
stallation instructions included)
•
All Kits support up to six (6)
ISEC
-
WL
-
KEYPAD
s and/or
ISEC
-
WL
-
TOUCH
s, combined. When the
Go
-
Anywhere
Hub
is connected to a network with a Wi
-
Fi access point, up
to four (4)
IBR
-
TOUCH
-
WL
tablet keypads can be used.
•
Powered by 16.5VAC transformer (included). Provision for
rechargeable 4AH or 5AH 12V backup battery (not supplied)
that automatically provides power during AC power outages
•
System fully monitors AC power and charges the backup
battery
•
LTE cellular radio module for wireless central station com-
munication, notifications, remote programming and firmware
downloads
•
Integral supervised bell output
•
Integral PGM output initiated by a keyfob button press
(toggle on/off or momentary on for 5 seconds)
•
900MHz Wireless Transceiver Module for adding other wire-
less system peripherals, including the
ISEC
-
WL
-
KEYPAD
,
the
ISEC
-
WL
-
TOUCH
Touchscreen
, the
ISEC
-
WL
-
MODULE
Takeover Module
and the
ISEC
-
WL
-
SIREN
.
•
Optional
ISEC
-
ZWAVE
Z
-
Wave Module
for programming/
control of Z
-
Wave home automation controls such as Z
-
Wave
-
enabled lights, outlets, thermostats, garage door oper-
ators and door locks
•
Optional
ISEC
-
WIFI
Internet Module
for central station com-
munication and notifications (supplied in KIT 3; see page 73
for kit ordering information).
•
Optional
SLE
-
ANTEXT30
/
50
/
75
/
100
Extended Range
Remote Indoor/Outdoor Antenna
to increase LTE cellular
transmission signal strength (see WI2230 for instructions)
•
Optional
ISEC
-
2WF
-
MOD
2
-
Wire Fire Sensor Module
that
supports 2 Fire zones (connect to
Fire Power [+]
,
Zone 7
[‒]
and
Zone 8
[‒]
terminals)
See page 73 for ordering and additional information
.
Note:
Not all pages in this manual apply to all systems. Use
the instructions for the peripherals and devices included with
the iSecure kit or for any additional devices purchased, as re-
quired.
All wireless devices, including Z
-
Wave devices,
must be signal tested with all enclosure covers fully
closed, including the Go
-
Anywhere Hub
.
Note:
iSecure, Gemini Wave (GEMWV) and Gemini (GEM)
transmitters are compatible with the iSecure system; however,
iSecure and Gemini Wave (GEMWV) transmitters are not com-
patible with Gemini GEM
-
Receivers.
PROGRAMMING
To simplify the installation process, the
Go
-
Anywhere Hub
can
be programmed either through the programming screens in the
iSecure phone app
or by accessing the same programming
screens
in
the
iSecure
Cloud
Web
Portal
(
www.iSecureByNapco.com
). In addition, a log containing up
to 800 events monitors Go
-
Anywhere Hub activity referenced
to a precision real
-
time clock. This detailed event history may
be displayed in the website page or in the app, as needed.
Overview
Go
-
Anywhere Hub
™
