46
All technical manuals are available in PDF format at
tech.napcosecurity.com
Napco iSecure Security System
Programming: Glass
-
Break Sensors
1.
Go to
www.iSecureByNapco.com
and log into your iSe-
cure account.
2.
Click
Sensor Configuration
.
3.
In the
SENSOR CONFIGURATION
screen (shown be-
low), program the installed glass break sensors as indicat-
ed (when finished, click
Save
).
ISEC
-
GLASSBREAK
Wireless Glass
-
Break Sensor
SENSOR TYPE
Select "
Glass
Break
".
ENABLE REPORTING
Check to enable central
station reporting
1
2
3
5
6
SENSOR ID
Type in the 7
digit sensor ID
# for the device
4
DESCRIPTION
Type the sensor descrip-
tion you wish to appear
on the keypad display
AREA
Default = 1. See the key-
pad Operating Guide for
the definition of "Area".
SENSOR FUNCTION
For most installations, we recommend selecting "
Instant
". With "
Instant
", when
the system is armed, the sensor will immediately trigger an alarm when the sound
of glass breaking is detected. If you select "
24Hr Zone Audible
", the system will
trigger an alarm when the sound of glass breaking is detected, whether the sys-
tem is armed or disarmed.
SIGNAL STRENGTH
Relative intensity of the last transmis-
sion, on a scale of 1
-
10 (10 being the
strongest).
Note:
A reading of 3 or
less indicates reception may be erratic;
relocate the sensor closer to the Hub.
