HARDWIRE
WIRELESS
L I B R A - P 4 3 2 E X S e r i e s
CONTROL PANEL/COMMUNICATOR
Programming the
LIBRA LIB-P432EX
,
LIB-P432EXT
,
LIB-P432EXT-230
Control Panels with the
GEM-DXRP1
and the
GEM-DXK1
Keypads
WI1690 9/08
© NAPCO 2008
PROGRAMMING
INSTRUCTIONS
R
Publicly traded on NASDAQ Symbol: NSSC
Quick Start (for GEM-DXRP1)
1. Refer to the wiring diagram, connect Siren, Aux. Power,
PGM Output, Remote Bus, Earth ground, Zone and Tele-
phone wiring. NOTE: See Installation Instructions
(WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 42).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789
w
Press
NO (
q
) until “
ACTIVATE PROGRAM Y/N
” appears on the
keypad display.
Press
YES (
p
) to Enter Dealer Program Mode. Go to page 5.
Quick Start (for GEM-DXK1)
1. Refer to the wiring diagram, connect Siren, Aux. Power, PGM
Output, Remote Bus, Earth ground, Zone and Telephone
wiring. NOTE: See Installation Instructions (WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 42).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789
w
Press
NO (
z
) until “
ACTIVATE PROGRAM Y/N
” appears on the
keypad display.
Press
YES (
p
) to Enter Dealer Program Mode. Go to page 5.
Dealer Code
Dealer Code
™
