background image

ArchiTech Mortise Lock & Surface-Mounted Networx Control Unit Mounting and Installation Instructions 

16 

NAPCO Security Technologies, Inc. (NAPCO) warrants its 
products to be free from manufacturing defects in materi-
als and workmanship for twenty four months following the 
date of manufacture. NAPCO will, within said period, at its 
option, repair or replace any product failing to operate cor-
rectly without charge to the original purchaser or user. 

This warranty shall not apply to any equipment, or any part 
thereof, which has been repaired by others, improperly 
installed, improperly used, abused, altered, damaged, 
subjected to acts of God, or on which any serial numbers 
have been altered, defaced or removed. Seller will not be 
responsible for any dismantling or reinstallation charges, 
environmental wear and tear, normal maintenance ex-
penses, or shipping and freight expenses required to re-
turn products to NAPCO.  Additionally, this warranty shall 
not cover scratches, abrasions or deterioration due to the 
use of paints, solvents or other chemicals. 

THERE ARE NO WARRANTIES, EXPRESS OR IM-
PLIED, WHICH EXTEND BEYOND THE DESCRIPTION 
ON THE FACE HEREOF. THERE IS NO EXPRESS OR 
IMPLIED WARRANTY OF MERCHANTABILITY OR A 
WARRANTY OF FITNESS FOR A PARTICULAR PUR-
POSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU 
OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE 
PART OF NAPCO. 

Any action for breach of warranty, including but not limited 
to any implied warranty of merchantability, must be 
brought within the six months following the end of the war-
ranty period.  

IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE 
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAG-
ES FOR BREACH OF THIS OR ANY OTHER WARRAN-
TY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR 
DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLI-
GENCE OR FAULT. 

In case of defect, contact the security professional who 
installed and maintains your security system. In order to 
exercise the warranty, the product must be returned by the 
security professional, shipping costs prepaid and insured 
to NAPCO. After repair or replacement, NAPCO assumes 
the cost of returning products under warranty. NAPCO 
shall have no obligation under this warranty, or otherwise, 
if the product has been repaired by others, improperly in-
stalled, improperly used, abused, altered, damaged, sub-
jected to accident, nuisance, flood, fire or acts of God, or 
on which any serial numbers have been altered, defaced 
or removed. NAPCO will not be responsible for any dis-
mantling, reassembly or reinstallation charges, environ-
mental wear and tear, normal maintenance expenses, or 
shipping and freight expenses required to return products 
to NAPCO.  Additionally, this warranty shall not cover 
scratches, abrasions or deterioration due to the use of 
paints, solvents or other chemicals. 

This warranty contains the entire warranty. It is the sole 
warranty and any prior agreements or representations, 
whether oral or written, are either merged herein or are 
expressly cancelled. NAPCO neither assumes, nor author-
izes any other person purporting to act on its behalf to 
modify, to change, or to assume for it, any other warranty 
or liability concerning its products. 

In no event shall NAPCO be liable for an amount in ex-
cess of NAPCO's original selling price of the product, for 
any loss or damage, whether direct, indirect, incidental, 
consequential, or otherwise arising out of any failure of the 
product. Seller's warranty, as hereinabove set forth, shall 
not be enlarged, diminished or affected by and no obliga-
tion or liability shall arise or grow out of Seller's rendering 
of technical advice or service in connection with Buyer's 
order of the goods furnished hereunder. 

NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM 
BE COMPLETELY TESTED WEEKLY. 

Warning: 

Despite frequent testing, and due to, but not 

limited to, any or all of the following; criminal tampering, 
electrical or communications disruption, it is possible for 
the system to fail to perform as expected. NAPCO does 
not represent that the product/system may not be compro-
mised or circumvented; or that the product or system will 
prevent any personal injury or property loss by burglary, 
robbery, fire or otherwise; nor that the product or system 
will in all cases provide adequate warning or protection. A 
properly installed and maintained alarm may only reduce 
risk of burglary, robbery, fire or otherwise but it is not in-
surance or a guarantee that these events will not occur. 
CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY 
FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, 
OR OTHER LOSS BASED ON A CLAIM THE PRODUCT 
FAILED TO GIVE WARNING. Therefore, the installer 
should in turn advise the consumer to take any and all 
precautions for his or her safety including, but not limited 
to, fleeing the premises and calling police or fire depart-
ment, in order to mitigate the possibilities of harm and/or 
damage.  

NAPCO is not an insurer of either the property or safety of 
the user's family or employees, and limits its liability for 
any loss or damage including incidental or consequential 
damages to NAPCO's original selling price of the product 
regardless of the cause of such loss or damage. 

Some states do not allow limitations on how long an im-
plied warranty lasts or do not allow the exclusion or limita-
tion of incidental or consequential damages, or differenti-
ate in their treatment of limitations of liability for ordinary or 
gross negligence, so the above limitations or exclusions 
may not apply to you. This Warranty gives you specific 
legal rights and you may also have other rights which vary 
from state to state. 

ArchiTech Networx Limited Warranty

 

Summary of Contents for Networx ArchiTech

















Reviews: