33
Overview
The
J
and
T
"style" ArchiTech series locks contain Bluetooth LE technology that allows for entry via a smartphone
application ("app"). The iLock smartphone app works essentially as any other type of proximity credential; simply
launch the iLock app and tap the
Unlock
button to allow entry. For added security, an optional password can be set
in the iLock app that would then be required for every unlock request.
Note:
Up to 27 Bluetooth Users are support-
ed for any one ArchiTech series lock.
Downloading the iLock App
For iPhone Users:
Go to your iTunes store, search for " iLock" and download the app.
For Android Users:
Go to your Google Play store, search for " iLock" and download the app.
Note:
The following special permissions are required:
Device Location
File Access.
Enrolling Bluetooth Credentials
After the iLock app has been downloaded and installed on your smartphone:
1. Run the iLock app and the
Settings
screen opens.
2. Place the ArchiTech series lock into Enroll Mode by pressing the "
Program / Passage
" button once (Enroll Mode
= continuous beeping with green LED flashes).
Depending on the programming "environment" of the lock (see page 9), Enroll Mode is entered as follows:
Initial lock startup
: Simply press the "
Program / Passage
" button once
Program Card Programming
: Present a " Program Card"
and with the state of the lock " unlocked"
,
press the "
Program / Passage
" button once
DL-Windows Mode
: Present a " Program Card" OR any Administrative User (2-11);
with the state of the
lock "unlocked",
press "
Program / Passage
" button once
3. Within 30 seconds, tap "
Add a New Lock
" on the iLock app.
4. In the
Select Lock
screen, select the lock that displays the device name of "
MyLock
". Lock acknowledges with
two beeps.
5. Within 120 seconds, enter a
Lock Name
and password (maximum 20 alphanumeric characters).
Successful Pairing:
Lock sounds 4 beeps with 4 green LED flashes
Unsuccessful Pairing:
Lock sounds 7 beeps with 7 red LED flashes.
6.
Exit Enroll Mode:
Press and firmly hold the "
Program / Passage
" button for 4 seconds until you hear a
series of beeps.
Follow the above steps for each additional Bluetooth credential.
Bluetooth Credential Considerations
If Bluetooth credentials were created / enrolled using "Program Card Programming" prior to integration with DL-
Windows, the Bluetooth credentials will NOT be overwritten and will remain in the lock memory.
Bluetooth credentials are added to slots 7000 through 7089*, and are logged accordingly.
The first two Bluetooth credentials added (slots 7000, 7001) have the same functionality as Administrative Users
(credentials added to any of the slots numbered 2 through 11 in DL-Windows). Therefore, the first two Bluetooth
Users have the ability to add additional Bluetooth credentials. See the "
ArchiTech User Number Definitions
" chart
on page 7.
Bluetooth Support
*The latest firmware has an expanded Bluetooth capacity, with credentials added to slots 7000 through 7089. Please note that this high number, which
indicates the maximum number of Bluetooth users, will vary depending on the firmware installed.
