Lay out the tent with the vehicle sleeve
facing the cargo area of your vehicle.
Assemble the tent poles by
unfolding each section.
Insert a fiberglass pole into the pole sleeve on the roof of the
tent. Place one end into the center hub, and the other end into
the starred end of the corner joint. Repeat with the 3 other
fiberglass poles.
NOTE: The poles may get stuck in the
pole sleeve. Do not force the pole –
gently lead it through the fabric sleeve.
3
1
PACKAGE CONTENTS
tent set up
2
TENT BAG
TENT TIE STRAPS (2)
TENT
POLE BAG
STAKE BAG
TENT POLES (11)
4 x Steel Tent Poles (82”) - Black
4 x Short Fiberglass Poles (53”) - Grey
1 x Long Fiberglass Pole (69”) - Grey
2 x Steel Screen Room Poles (82) - Blue
AWNING POLES (2)
2 x Steel Awning Poles (71”)
RAINFLY
GEAR LOFT
GUY LINES (4)
STAKES (26)
AWNING POLE
CAPS (4)
Remove contents from the bag and ensure you have all components listed below.
If you are missing parts, please contact Napier Outdoors at 800-567-2434 | Monday - Friday or email customerservice
@
napieroutdoors.com
