6
W415-0713 / A / 11.09.10
G.
Slide
the
fl at portion of log #7 under the
second grate post.
NOTE: Logs 3, 4, 5, 6 and 7 are included
twice. Install these logs on the opposite
side. Logs 8 and 9 are only included once,
to give a different appearance to each side.
Install logs 8 and 9 on the side that you
prefer. If desired a 2nd set of 8 and 9 logs are
available in an upgrade kit GL81L2 and can
be purchased to make both sides identical.
H.
Place the pin in log #8 into the locating
hole on log #1 and rest the bottom of
the log on log #5.
I.
Place the pin in log #9 into the locating
hole on log #2 and rest the bottom of
the log #3.
7
8
9
1
5
2
3
J.
If GL81L2 (upgrade kit) is purchased repeat
“H” and “I”
on other side.
2.7 CHARCOAL
LUMPS
34.1
Place the lumps in front of the logs in a realistic manner taking care not to block any of the burner ports.
!
WARNING
CHARCOAL EMBERS, VERMICULITE AND CHARCOAL LUMPS ARE NOT TO BE PLACED ON THE
BURNER.
2.8 CHARCOAL
EMBERS
32.1
Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
