34
W415-1107 / 07.24.12
F.
Place the pin in
log #7 in the hole
in log #6. The log
should sit in the
notch on log #2
and the bottom
should rest along
the right side of
the Andiron.
PHAZER™ logs and glowing embers, exclusive to Wolf Steel Ltd.
fi
replaces, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colors may vary. During the initial use of the appliance, the colors will become
more uniform as color pigments burn in during the heat activated curing process.
A.
Center the rear
log (#1) behind
the rear burner
and onto the log
support.
H.
Place log#9 onto the
grate as though it
had burnt off log#5.
Place log#10 onto
the locating pin on
log#1. Again, log#10
should be aligned as
though it has burnt
off of log#7.
B.
Place log#2 and
log#3 onto the
locating pins.
The logs should
sit
fl
at on the
burner.
C.
Place the locating
hole on the under-
side of log#4 onto
the locating pin on
top of log#3. The
notch at the oppo-
site end of log#4
sits on the third
grate post in from
the right side.
D.
Place the small
branch of log#5
into the notch on
log#3. The notches
on the bottom edge
of log #5 should
sit on the
fi
rst and
second grate posts
from the left.
E.
Place the small
end of log#6 into
the front notch
of log#4. Place
the locating hole
in the large end
of log#6 onto the
locating pin on
top of log#2.
7
1
2
3
4
5
6
8
9
10
G.
Place the large
end of log#8 into
the rear notch of
log#4.
The small branch
of log#8 sits in
the notch located
on top of log#1.
7.5 LOG
PLACEMENT
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A
Summary of Contents for BGD90NT-E
Page 56: ...56 W415 1107 07 24 12...
Page 57: ...56 W415 1107 08 10 12...
