A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
placed on the burner.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E
F
PINS
A
B
placed on the burner.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E
F
PINS
Before placing the log set, ensure to cover the wiring on the right side of the burner with charcoal lumps. Leave
enough charcoal lumps to randomly fill the front of the logs. Charcoal lumps are not to be placed on the burner.
2.5 log placement
A.
Align the 2 notches on the bottom of the
bottom rear log (A) with the studs located
on the rear log support.
NOTE:
Ensure the bottom rear log (A) is
behind the burner tube.
B.
Align the 2 pins on the top of the bottom
rear log (A) with the 2 holes in the bottom
of the top rear log (B).
C.
Align the 2 holes in the bottom of the
middle log (C) with the 2 studs located
on the front log support.
E.
Align the 2 bottom notches of the front
right log (E) with the 4th and 5th grate
posts, ensuring the front right log (E)
lies flat. Do not cover any ports on the
burner.
D.
Align the 1 hole in the bottom of the rear
left log (D) with the left pin on the top of
the top rear log (B). Ensure to rest the rear
left log (D) towards the front left corner of
the burner. Adjustments may be needed
to ensure correct placement.
F.
Align the notch in the front left log (F) with
the 1st grate post, ensuring the jagged
edge faces forwards, and then push it
backwards slightly. Adjustments may be
needed to ensure correct placement.
EN
W415-2193 / D / 11.08.18
5
installation
