A.
Remove the door,
refer to installation
instructions. Remove
the 8 securing screws
and lift the plate
up and out of the
appliance. Gasket will
need to be replaced if
damaged.
A.
Attach the burner assembly to the fi rebox
base with the 2 screws supplied.
This burner and log assembly are approved for use in the HDX52 gas fi replace only. They are not approved for
use as a stand alone appliance or in conjunction with any other appliance.
1.0 GENERAL INFORMATION
2.0 INSTALLATION
2.1 ACCESS
PANEL
2.2 BURNER
ASSEMBLY
1.0
GENERAL INFORMATION
2
2.0 INSTALLATION
2
2.1 ACCESS
PANEL
2
2.2 BURNER
ASSEMBLY
2
2.3 BULKHEADS
3
2.4
HEARTH PANEL INSTALLATION
4
2.5
HEARTH LOG & LOG PLACEMENT
5
2.6 CHARCOAL
LUMPS
7
2.7 CHARCOAL
EMBERS
7
2.8 VERMICULITE
8
2.9 GLOWING
EMBERS
8
3.0 ADJUSTMENT
8
3.1 FLAME
CHARACTERISTICS
8
3.2 VENTURI
ADJUSTMENT
8
4.0 REPLACEMENTS
9
5.0
HDX52 LOG BURNER ASSEMBLY(NG)
10
6.0
HDX52 LOG BURNER ASSEMBLY(LP)
11
INSIDE UNIT
OUTSIDE UNIT
2
W415-1632 / A / 05.02.16
EN
NOTE: Changes, other than editorial, are denoted by a line in the margin.
TABLE OF CONTENTS
