W415-1066 / C / 06.22.12
38
inspect and replace all broken firebricks ad baffles.
7.6 FIrEBrICkS ANd BAFFLES
!
WARNING
!
WARNING
OpERATION OF THE AppLIANCE wITHOUT THE BAFFLEs CAN REsULT IN ExCEssIvE
TEMpERATUREs THAT COULD DAMAgE THE AppLIANCE, CHIMNEY AND THE sURROUNDINg
ENCLOsURE.
2200
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
D
D
E
F
F
briCk overvieW:
¾” x 3 ½”
FLAT
GASKET
¼” ROPE
GLASS
GASKET
SILICONE
DO NOT sUBsTITUTE MATERIALs.
gLAss MAY BE HOT, DO NOT TOUCH gLAss UNTIL COOLED.
CARE MUsT BE TAkEN wHEN REMOvINg AND DIspOsINg OF ANY BROkEN DOOR gLAss OR
DAMAgED COMpONENTs. BE sURE TO vACUUM Up ANY BROkEN gLAss FROM INsIDE THE Ap-
pLIANCE BEFORE OpERATION.
DO NOT sTRIkE, sLAM OR sCRATCH gLAss. DO NOT OpERATE AppLIANCE wITH gLAss RE-
MOvED, CRACkED, BROkEN OR sCRATCHED.
A.
When the appliance is cool, remove the door and place it face
down on a soft surface. be careful not to scratch the paint.
B.
remove the 5 screws securing the glass retainers.
C.
remove all broken glass.
D.
Cut the 3/4” flat gasket into 3 1/2” (89 mm) lengths and affix to
glass retainers as illustrated, ensure the gasket extends past
the ends of the retainers by 1/4” (6 mm).
E.
apply small beads of silicone in the gasket groove, as shown.
F.
place the rope gasket in the gasket groove, on top of the
silicone.
g.
place the glass on the door. re-install the glass retainers.
NOTE: For replacement glass, size, thickness and specifica-
tions see “REpLACEMENTs” section.
7.7 gLASS rEPLACEmENT
