N415-0238 NOV 18/10
PTSS165 ACCESSORY MOUNTING INSTRUCTIONS
Napoleon Appliance Corp.,
214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 Phone: (705)726-4278
Fax: (705)725-2564 email: wecare@napoleonproducts.com web site: www.napoleongrills.com
Use these instructions in conjunction with your main manual to properly
assemble your gas grill. Refer to the main manual for safety, operating,
cleaning and maintenance instructions.
WARNING!
Clearance to combustibles as outlined in your main manual and specified on your grill’s rating
plate must be maintained.
R.V. Table Mounting Instructions
WARNING!
A grill installed on a R.V. must be installed on the opposite side as the fuel distribution/
dispensing system.
1. Attach the extruded accessory support (not included) to the outside of the R.V. or wall using appropriate screws
(not included). When attaching the support, be sure to locate a stud or some structure to screw into, as the siding
alone will not be strong enough to hold the weight of the grill. Mount approximately 40” from the ground as
illustrated. (The height of the support is approximate and can be adjusted according to individual preference.) The
mounting system must have a minimum load specification of 30lbs (13.6kg) with the system fully extended and in
the locked position.
