Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon.com
W415-2021 / C / 12.19.19
S20
Floor Protection
Minimum Clearance to Combustibles
Alcove Installation
Appliance Placement
BACK WALL
B
SIDE WALL
A
BACK WALL
C
SIDE WALL
F
D
E
E
PARALLEL & CORNER
SINGLE WALL CONNECTOR
DOUBLE WALL CONNECTOR
Sidewall (A)
19” (48.3cm)
Sidewall to fl ue (B)
28 7/8” (73.3cm)
Backwall (C)
17 1/2” (44.5cm)
12 1/2” (31.8cm)
Backwall to fl ue (D)
21” (53.3cm)
16” (40.6cm)
Corner (E)
11" (27.9cm)
7" (17.8cm)
Ceiling (F)
84" (213.4cm)
75” (190.5cm)
Clearances can be reduced with shielding acceptable to local authorities. Re-
duced installation must comply with NFPA 211 or CAN/CSA-B365.
!
WARNING
•
Do not install into any area having less than 7 feet (2.1m)
(ceiling to appliance bottom, excluding hearth height).
19"
(48.3cm)
28
7
/
8
"
(733.4mm)
ALCOVE
48” (122cm)
MAX
A
B
F
G
K
J
J
I
L
M
M
N
MINIMUM FLOOR PROTECTION
FRONT (L)
SIDES (M)
BACK (N)
CANADA
18" (45.7cm)
8" (203mm)
USA
16" (40.6cm)
If a section of horizontal chimney connector is used, fl oor
protection is required under the chimney connector and 2”
(51mm) beyond each side.
note:
Product information provided is not complete and is subject to change
without notice. Please consult the installation manual for the most up to
date installation information.
We recommend having your Napoleon wood burning appliance
installed by a qualifi ed technician. However, should you choose
to install the appliance yourself, it is extremely important that you
follow all installation instructions for the appliance, the chimney and
connector if applicable, as well as local building codes. At the very
least, draw a detailed plan of your installation, including clearance
dimensions to combustibles, and have your authorized dealer
review them to confi rm that they conform to the relative installation
parameters.
When positioning the appliance, it may be necessary to adjust
its position to prevent the chimney/vent system from intersecting
with a framing member and to meet the minimum combustible
clearance requirements. Its location should also avoid the potential
for drapes or doors to swing within 48” (122cm) in front of the
appliance to prevent a fi re hazard.
note:
K
J
H
I
ALCOVE
PARALLEL &
CORNER
SINGLE WALL
CONNECTOR
DOUBLE WALL
CONNECTOR
Ceiling (G)
N/A
75" (190.5cm)
Sidewall (H)
19” (48.3cm)
Sidewall to fl ue (I)
28 7/8” (73.3cm)
Backwall (J)
12 1/2” (31.8cm)
Backwall to fl ue (K)
16” (40.6cm)
